What are the advantages of radiators and how to maintain them

There are more and more heating methods in HVAC installation. Radiators are one of them. When buying radiators, some people will compare them with other heating methods. What are the advantages of radiators? If you want to use a radiator longer, you need to maintain it. How should the radiator be maintained?

one. What are the advantages of radiators

1. This kind of product uses relatively good materials, has good heat dissipation effect and is easy to install. It is loved by people. The radiator mainly uses the boiler to heat the circulating water, and then connects to the radiator through the pipe, and finally outputs the appropriate temperature through the radiator. , The formation of indoor temperature difference, and then heat cycle to make the entire indoor temperature rise uniformly.

2. There is no requirement for the quality of the ground. No matter what kind of material, it can be used for insulation ducts, which will not affect the surface of the home, and the decorated house can also be installed, which will not affect the decoration and life of the home.

Second, how to maintain the radiator

1. Check for water leakage. During the heating period, the external temperature of the radiator is high. After the heating is stopped, the temperature of the radiator will decrease, which may cause the phenomenon of expansion and contraction, especially at the pipe joints. If the joints are loose, There is a water leak.

2. Clean the radiator. After a heating season, there must be a lot of debris, dust and stains on the outside of the radiator. In order to prevent the regeneration of harmful bacteria and purify the indoor environment, it is necessary to clean the surface of the radiator.

3. In non-residential rooms, in order to avoid freezing and cracking in the heating system, some users will add antifreeze to the heating system. When buying antifreeze, you must look for regular manufacturers and comply with national standards. Do not use small brands or small workshops. Products, so as to avoid the quality is not up to standard and corrode the inner wall of heating.

4. When the radiator is not used, a cloth cover can be added to it to prevent bumps or dust from falling on it. Don't even seal the radiator, so that it is difficult to find after water leakage. Do not damage or bump the wings of the copper-aluminum composite heating system, let alone place heavy objects on it, or step on the heating system. These will cause excessive pressure on the interface, gaps in the valve, and water leakage during use.

5. Drain the water inside the heater, and then when filling the water, open the air release valve and close it when you see water flowing out. So as not to produce blisters inside, affecting heat dissipation.