Central air conditioning installation requirements and solutions

Factory central air-conditioning installation requirements: air-conditioning maintenance

1.Change the traditional large-scale industrial site refrigeration consumes serious energy, and the operating cost remains high;

2. High requirements for energy utilization, high environmental protection requirements and the need to minimize costs;

3. The air conditioning load becomes larger, and the cooling capacity adjustment range of the unit should be wider.

Factory central air-conditioning engineering solutions:

Fixed frequency centrifugal unit + frequency conversion centrifugal unit + purification type combined air conditioning unit has the following advantages.

1. Cleaner, high comprehensive energy efficiency, convert a small amount of electric energy into more than 9.1 times the cooling capacity to provide cold water, and save more than 30% of energy-saving operating costs;

2. Microcomputer monitoring, no manual management is required;

3. The energy adjustment range is 5-100, and the unit always runs in a low energy consumption state.

Advantages of plant central air-conditioning project

Central air conditioning is one of the commonly used ventilation and cooling equipment in office buildings, workshops and factories. Below, let's take a look at the advantages of the central air conditioning project of the factory.

1. Energy saving and environmental protection

The central air-conditioning unit of the plant’s central air-conditioning project uses a water-source heat pump to cool down the temperature through electric energy without burning energy, which not only saves electricity and energy, but also effectively avoids pollution. On the other hand, under normal circumstances, not only central air-conditioning is installed inside the plant, but also a fresh air system. Used in conjunction with the fresh air system, the fresh air system not only introduces fresh air to the factory environment, but also optimizes the energy loss in the use of central air conditioning, making the central air conditioning project more energy-saving when used.

2. Green and healthy

The plant’s central air-conditioning project can reduce the temperature of the workshop, and it can also clean the air with the belief system and improve the workshop environment. In addition, the central air-conditioning project of the plant avoids the situation that the general air-conditioning directly blows to people, can prevent air-conditioning diseases, and is more healthy and environmentally friendly.

3. Save space

The main body of the central air-conditioning project of the plant is small and exquisite, and the floor area is not too large, which saves space for the plant and eliminates the trouble of setting up a storage room for the central air-conditioning separately. This is of great significance to factories with a large flow of people and a large amount of crowd activity.

4. Considerable economic benefits

The main engine inside the workshop can be controlled individually or centrally. Use a computer to control the central air-conditioning host. When no one is working in an air-conditioned area inside the plant, the central air-conditioning host running in that area can be turned off. Implement computer control, you can freely turn off or turn on the host in a certain area, saving power for the factory.

5. Convenient management

The convenient management of the central air-conditioning project in the plant is also a major advantage of the central air-conditioning. The main units of the central air-conditioning system in the plant can be controlled independently or centrally, but the power consumption of each main unit is not affected by the power consumption of other main units, and the power consumption of each main unit is calculated and billed separately.